Output :
 a) 0 to 30V DC at 0 to 2 Amp.
 b) 0 to 30V DC at 0 to 5 Amp.
 c) 0 to 30V DC at 0 to 10 Amp.
 d) 0 to 30V DC dual independent or dual tracking at 0 to 2A.   
 e) 0 to 30V DC dual independent or dual tracking at 0 to 5A.
 f) The output voltages and maximum currents are continuously    adjustable by coarse and fine controls.
 g) Voltage and current readings are displayed on separate 3 ½     digit meters of accuracy of ± 2 least counts. 

 Output :
 a) 0 to 300V DC at 0 to 100mA.
 b) 0 to 300V DC at 0 to 300mA.
 c) 0 to 300V DC at 0 to 500mA.
 d) 0 to 300V DC at 0 to 1000mA.
 e)100V DC at 0 to 1A/2A/5A.
 f) All DC output are continuously adjustable.
 g) DC Voltage and current readings are displayed on 3 ½  Digit  meters of accuracy of ± 0.5 ± 2 least counts.

   Protection : Outputs are protected for short circuits and    overloads.

 Protection : All DC Outputs are for short circuit and     overload protected.
  AC output is protected for overload and short circuit thru fuse.

  Regulation :
  ± 0.05% for no load to full load and for ±10% variations in input mains voltage. Regulation is constant voltage constant current type.

  Regulation :
  ± 0.1% for DC outputs for no load to full load and for ±  10% variations in input mains voltage constant current type.

  Ripple:
  Less than 3 mV r.m.s.

  Ripple:
  Less than 10mV r.m.s. in DC output.

  Power Requirements :
 230 ± 10% volts, AC, 50/60Hz.  

  Power Requirements :
  230 ± 10% volts, AC, 50/60Hz. 50,150,250 and 60VA.