High Voltage Power Source (Model H-12) - Manufacturer, Dombivili, India

To inquire, Select Product/s & Click on

Product Code : A-07

[Select]

Product Specification

High Voltage Power Source (Model H-12)
The instrument is used to get the high voltage 0 to 12 KV/100mA as output from the 230VAC input. This is provided with built-in SF6 gas filled standard capacitor and useful for both grounded as well as ungrounded objects. Higher KV and current capacity power supply can be provided as per the requirements.

Features

Zero start control, external interlock, open ground indicating lamp, HT cut-off on overload. Instrument can be used in three different modes.
UST (Ungrounded specimen test): Used when the object under test is not grounded. This mode provides most accurate results.
GST (Grounded specimen test): Used when the object under test is permanently grounded. This mode often used for outdoor installed power systems.
GSTg (Grounded specimen test with guard): Used to measure the stray capacitances and separating them from basic measurement in GST mode.

Technical Specification

Test Voltage	0 to 10Kv / 50Hz.
Rated Power	1 KVA maximum.
Rated Current	100mA (long term) current capacity.
Power Required	230V AC Â± 10% / 50Hz.
Standard Capacitor	Capacitor is compressed with SF6 gas.
Capacitance	100 pf Â± 5% or actual value.
Tan - Delta	Less than 0.00001
Dielectric	SF6 gas
Test Voltage	up to 12 KV RMS Max.
Voltage	14 KV RMS (1 minute)
Voltage Induction	3 Â½ digit DPM
Size	510 x 550 x 590mm.

Other Products

Servo Controlled Voltage Stabilizer	Transformer Oil Filtration Plants	Current Injection Sets	Losses Measuring Meters	Transformer Ratio Meters	Portable Relay Test Sets

<< Back