Transformer Oil Filtration Plants - Manufacturer, Dombivili, India
AJIT ELECTRONICS CO.
 
   
 
Home Page  
Company Profile  
Showroom  
Electrical Testing & Measuring Equipment    
Transformer Oil Filtration Plants
To inquire, Select Product/s & Click on

Product Code : A-14

[Select]
Product Specification
Transformer Oil Filtration Plants
Feature:
  • Break Down Voltage from 20 KV to more then 50 kV
  • Filtration level upto < 1 micron.
  • Moisture contents - from 50 -100 PPM to < 5 PPM.
  • Gas contents - upto < 0.05% by volume.
  • Neutralization value- < 0.1 mg of KOH / gm.
  • Plants with minimum and easy maintenance.
  • Low Operating cost due to high vacuum filtration with rotary oil sealed pumps.
  • Available in Portable & Mobile versions.
Application:
  • Oil transfer & circulation system: The plants will have two pumps for oil transfer and circulation. Both pumps will be positive displacement gear type, directly coupled with electric motor. The plants will have necessary valves and piping to ensure easy operation and maintenance.
  • Heating System: The plants will have an insulated heater chamber with indirect type bobbin heater for heating of oil up to 80° C. However the working temperature for filtration will be 55° C. Heater pipes will be finned to have more efficient heat transfer. Temperature will be controlled with thermostat or Digital Temperature indicator cum controller.
  • Filtration System: The filtration system is suitable for removing suspended particles such as colloidal carbon, oxidation sludge, dirt, rust.
  • Degassing chamber and vacuum system: The oil dispersed while passing through fine filter will be sprayed on reaching ring tray to have an exposure of oil film to vacuum, because of which moisture removal rate will be increased. Degassing chamber will be evacuated with rotary oil sealed vacuum pump moisture trap, valves, etc.
  • This plants are suitable for Hydraulic Oil, Thermic Fluid, etc.
Technical Specification:
Flow Rate - LPH
600
1200
2400
4500
6000
Heater Capacity- K.W.
6
18
45
63
81
Single stage Rotary Oil sealed vacuum Pump.
100 LPM
300 LPM
500 LPM
1000 LPM
2000 LPM
Total Power Required
7.5 K.W.
20 KW.
50 kW
70 kW
96 kW
Fine Filter Elements Moulded Cellulose  
Filter Fineness
3 / 0.5 µ
Dimensions    In Mtrs.                          
Stationery Unit, W / L / H
0.6/0.9/1.4
0.8/1.2/1.5
1.0/1.8/1.6
1.2/2.0/1.7
1.2/2.4/1.8
Unit on Castors, W / H / L
0.6/0.9/1..6
0.8/1.2/1.7
1.0/1.8/1.9
1.2/2.0/2.0
1.2/2.4/2.1
Unit of Trailers, W / H / L
1.2/1.4/2.1
1.4/1.7/2.2
1.6/2.2/2.4
1.8/2.4/2.6
1.8/2.8/2.6
Max Oil Content in Transformer - Ltrs
1000
2500
7500
20000
35000

Other Products
High Voltage Power Source (Model H-12)
High Voltage Power Source (Model H-12) 		Heating Chamber (OHC) with Three Terminal Oil Cell
Heating Chamber (OHC) with Three Terminal Oil Cell 		Capacitance And Tan Delta Test System
Capacitance And Tan Delta Test System 		Current Injection Sets
Current Injection Sets 		Heating Chamber (OHC) with hree terminal oil cell
Heating Chamber (OHC) with hree terminal oil cell 		Servo Controlled Voltage Stabilizer
Servo Controlled Voltage Stabilizer
 
<< Back
CONTACT DETAILS
GALA NO. 2, SAWALARAM BHAVAN, VIDYANIKETAN ROAD, MANPADA VILLAGE, DOMIVILI(E),Dombivili - 421204, Maharashtra, India
Phone:91-251-2871652
Fax:91-251-2871652
Send Mail  
Key Personnel
Mr. S. B. Nardekar
Mobile:+919833693792
Copyright © 2008 by Tradeindia.com. All Rights Reserved.